LG LCU240CP Service Manual - Page 30

Optional Operation

Get LG LCU240CP PDF manuals and user guides View all LG LCU240CP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Installation 9. Optional Operation 1) Two Thermistor System (1) Open the rear cover of the wired remote-controller to set the mode. (2) Select one of three selectable modes as follows. • Position 1: The room themperature is controlled by the thermistor of the wired remote-controller, control the temperature according to the position of wired remote-controller. • Position 2: The room temperature is controlled by the thermistor of the main body. • Position 3: The room temperature is controlled by lower temperature between the temperature of main body and of remote-controller sensor. (3) Move the slide switch to set position. Slide switch for 2 Thermistor 1 2 3 1 1 2 3 2 3 (4) Close the rear cover and check if it works normally. CAUTION • Select the position after counselling with a customer. • In case of cooling mode, room temperature is controlled by the main body sensor. • To control the room temperature by a wired remote controller, install controller(room temp. sensor) to sense the temperature more accurately. • Maunfactured in the position 3. 30 Ceiling Cassette Air Conditioner

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
30
Ceiling Cassette Air Conditioner
Installation
9. Optional Operation
1) Two Thermistor System
(1) Open the rear cover of the wired remote-controller to set the mode.
(2) Select one of three selectable modes as follows.
•
Position 1: The room themperature is controlled by the thermistor of the wired remote-controller, control the
temperature according to the position of wired remote-controller.
•
Position 2: The room temperature is controlled by the thermistor of the main body.
•
Position 3: The room temperature is controlled by lower temperature between the temperature of main body
and of remote-controller sensor.
(3) Move the slide switch to set position.
(4) Close the rear cover and check if it works normally.
Slide switch for 2 Thermistor
1
2
3
1
2
3
1
2
3
•
Select the position after counselling with a customer.
•
In case of cooling mode, room temperature is controlled by the main body sensor.
•
To control the room temperature by a wired remote controller, install controller(room temp. sensor) to sense
the temperature more accurately.
•
Maunfactured in the position 3.
CAUTION