LG LCV900B Owner's Manual - Page 10

O P E R AT I O N WARNING Personal Injury Hazard Do not set the vacuum on the stairs, always keep the unit on the floor. Control Operation 1 2 3 4 Adjusting for Carpet Pile Height To adjust for pile height: It may be necessary to raise and lower the power head for various carpet pile heights. Press the right foot pedal to adjust height of the agitator. Each press will raise the agitator one notch. Suggested pile height settings: You may need to raise the head of the vacuum cleaner to make vacuuming area rugs and longer pile rugs easier. 1. MAX : For maximum suction of the vacuum cleaner. 2. MIN : For minimum suction of the vacuum cleaner. 3. FLOOR/CARPET : To turn the agitator on or off. 4. OFF: To turn the canister off. For maximum cleaning performance, the following carpet height settings are recommended: • L - for bare floors • ML - for standard carpet • Higher settings - for very deep pile carpet where easier pushing effort is desired, while maintaining good cleaning performance. There are 4 settings: H = High M = Medium ML = Medium Low L = Low NOTE: If the vacuum is difficult to push, change the height adjustment to the next highest setting. Attention: Special care is required when vacuuming certain types of carpet or flooring. Always check the carpet or floor covering manufacturer's recommended cleaning instructions before vacuuming. 10