LG LCV900B Owner's Manual - Page 18

Agitator Maintenance, Replacing the Agitator Belt

Get LG LCV900B PDF manuals and user guides View all LG LCV900B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

CARE & CLEANING Agitator Maintenance Replacing the Agitator Belt WARNING Electrical shock and personal injury hazard. Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical shock or personal injury. WARNING Electrical shock and personal injury hazard. Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical shock or personal injury. Frequently check the agitator brush area for hair, string and lint buildup. Remove the Agitator Brush Cover: 1. Unplug the canister. Disconnect power nozzle from the wand. 2. Turn the power nozzle over, so that the agitator is facing up. 3. Set the power nozzle on a cloth or a smooth surface.Remove the six screws on the bottom of the head and remove the cover. If the belt breaks, follow the steps below to replace the agitator belt. To Replace the Belt: 1. R emove the agitator brush cover. 2. Lift the agitator straight out. 3. U nhook the old belt from the drive pulley. Make sure no pieces of the broken belt are trapped in the agitator or drive pulley area. 4. Carefully remove any accumulated string, hair, etc. from the agitator and the agitator area. 4. H ook the new belt over drive pulley of agitator motor. To reinstall the cover, reverse the steps above. 5. F it the agitator through the belt, making sure the belt is aligned with the pulley section of the agitator. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
18
CARE & CLEANING
Agitator Maintenance
Frequently check the agitator brush area for hair,
string and lint buildup.
Remove the Agitator Brush Cover:
1. Unplug the canister. Disconnect power nozzle
from the wand.
2. Turn the power nozzle over, so that the agitator is
facing up.
3. Set the power nozzle on a cloth or a smooth
surface.Remove the six screws on the bottom of
the head and remove the cover.
4. Carefully remove any accumulated string, hair,
etc. from the agitator and the agitator area.
Replacing the Agitator Belt
If the belt breaks, follow the steps below to replace
the agitator belt.
To Replace the Belt:
1. Remove the agitator brush cover.
2. Lift the agitator straight out.
3. Unhook the old belt from the drive pulley. Make
sure no pieces of the broken belt are trapped in
the agitator or drive pulley area.
4.
Hook the new belt over drive pulley of agitator motor.
5. Fit the agitator through the belt, making sure the
belt is aligned with the pulley section of the
agitator.
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
WARNING
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
WARNING
To reinstall the cover,
reverse the steps above.