LG LCV900B Owner's Manual - Page 22

Troubleshooting - review

Page 22 highlights

TROUBLESHOOTING Review this chart to find do-it-yourself solutions for minor performance problems. Any service or repair needed, other than as described in this Owner's Manual, should be performed through your local LGE service center. WARNING Electrical shock and personal injury hazard. Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical shock or personal injury. PROBLEM Vacuum cleaner will not run POSSIBLE CAUSE • Unplugged at wall outlet • Hose is not connected to the body properly • Dust tank improperly installed • Clogged hose, wand, nozzle POSSIBLE SOLUTION • Make sure cord is plugged into a functioning outlet. • Remove the hose from the body and reconnect it properly. • Make sure all dust tank components and filters are installed correctly. • Check for clogs. Poor suction • Full or clogged dust tank and filters • Dust tank improperly installed • Clogged hose, wand, nozzle • Empty dust tank and clean filters. • Make sure all dust tank components and filters are installed correctly. • Check for clogs. LED on the hose is lit • Dust tank is full • Empty dust tank Indicator Indicator • Power is on without dust tank • Rotating plate in the dust tank is restricted because of obstruction • Reattach dust tank • Remove obstruction. Unit runs louder than usual • Clogged hose, wand, nozzle • Check for clogs. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

22
Review this chart to find do-it-yourself solutions for minor performance problems.
Any service or repair needed, other than as described in this Owner's Manual, should be performed through
your local LGE service center.
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical
shock or personal injury.
WARNING
TROUBLESHOOTING
PROBLEM
Vacuum cleaner will
not run
Poor suction
LED on the hose is lit
Unit runs louder than usual
• Unplugged at wall outlet
• Hose is not connected to
the body properly
• Dust tank improperly
installed
• Clogged hose, wand,
nozzle
• Full or clogged dust tank
and filters
• Dust tank improperly
installed
• Clogged hose, wand,
nozzle
• Dust tank is full
• Power is on without dust
tank
• Rotating plate in the dust
tank is restricted because
of obstruction
• Clogged hose, wand,
nozzle
• Make sure cord is plugged into a
functioning outlet.
• Remove the hose from the body and
reconnect it properly.
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs.
• Empty dust tank and clean filters.
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs.
• Empty dust tank
• Reattach dust tank
• Remove obstruction.
• Check for clogs.
POSSIBLE CAUSE
POSSIBLE SOLUTION
Indicator