LG LCV900B Owner's Manual - Page 23

PROBLEM, Musty or unusual smell, Agitator does not turn, POSSIBLE CAUSE, POSSIBLE SOLUTION - bare floor nozzle

Get LG LCV900B PDF manuals and user guides View all LG LCV900B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

ENGLISH TROUBLESHOOTING PROBLEM Musty or unusual smell Agitator does not turn POSSIBLE CAUSE • Smell of new motor • Old and dirty filters • The foam filter or exhaust filter is wet. POSSIBLE SOLUTION • New vacuum cleaner smell should disappear in 1-2 months. • Empty dust tank and clean filters. • Dry the foam filter or exhaust filter completely away from sunlight. • Switch is off (unit is in bare floor mode) • The power nozzle is disconnected with the wand. • Agitator motor overload protection is tripped (brush is jammed) • Belt broken • The wand is disconnected with the hose. • Turn on agitator power switch. • Properly connect the power nozzle to the wand. • Unplug the vacuum cleaner and check the agitator for obstructions and reset the unit. • Replace belt. • Properly connect the wand to the hose. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
23
ENGLISH
TROUBLESHOOTING
PROBLEM
Musty or unusual smell
Agitator does not turn
• Smell of new motor
• Old and dirty filters
• The foam filter or exhaust
filter is wet.
• Switch is off (unit is in
bare floor mode)
• The power nozzle is
disconnected with the
wand.
• Agitator motor overload
protection is tripped
(brush is jammed)
• Belt broken
• The wand is disconnected
with the hose.
• New vacuum cleaner smell should
disappear in 1-2 months.
• Empty dust tank and clean filters.
• Dry the foam filter or exhaust filter
completely away from sunlight.
• Turn on agitator power switch.
• Properly connect the power nozzle to the
wand.
• Unplug the vacuum cleaner and check the
agitator for obstructions and reset the unit.
• Replace belt.
• Properly connect the wand to the hose.
POSSIBLE CAUSE
POSSIBLE SOLUTION