LG LSE4615ST Owners Manual - Page 36
Remote Start
View all LG LSE4615ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
36 OPERATION Changing the Probe temperature while cooking 1 Press Probe. 2 Set the probe temperature. 3 Press Start. IMPORTANT NOTE Turn the oven mode knob to the Off position to cancel the Meat Probe function at any time. To avoid breaking the probe, make sure food is completely defrosted before inserting. CAUTION •• Always use an oven mitt to remove the temperature probe. Do not touch the broil element. Failure to obey this caution can result in severe personal injury. •• To avoid damage to the meat probe, Do not use tongs to pull on the probe when removing it. •• Do not store the meat probe in the oven. •• Do not pull wire to remove probe. Hold the probe head, not the wire, when inserting or removing probe. Remote Start If the appliance is registered on a home Wi-Fi network, this function starts preheating and then holds the temperature for up to an hour (including preheating time). If the appliance is not registered on the network, "OFF" appears in the display. Follow the instructions on page 39 to register the appliance on the network. Set the oven mode knob to the Remote Start position to use the function. For Model : LSE4615 For Model : LSE4613 For Model : LSE4611 Recommended Probe Temperature Chart Doneness Beef, Lamb and Veal Rare Medium Rare Medium Well Done Pork Well Done Poultry Breast, Well Done Thigh, Well Done Stuffing, Well Done Probe Temp. 130 °F (54 °C) 140 °F (60 °C) 150 °F (66 °C) 160 °F (71 °C) 170 °F (77 °C) 170 °F (77 °C) 180 °F (82 °C) 165 °F (74 °C) Setting Remote Start 1 Open the oven door to make sure the oven is empty and ready for pre-heating. Close the oven door. 2 When ON appears in the display, the Remote Start function is ready to use. 3 Follow the directions in the smart phone application to set the cook mode, temperature, and run time (preheating time plus holding time). NOTE Do not place food in oven before or during Remote Start run time. Remote Start is disconnected in the following situations: •• Remote Start is never set up in the smart phone app. •• The Remote Start status is "OFF" or "door". •• Remote Start experiences a problem during operation. •• The Remote Start function cannot be started when the oven door is open. A beep alerts you to shut the door.