LG LTNC11131V Owners Manual - Page 11
Before use
![]() |
View all LG LTNC11131V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH HOW TO USE 11 HOW TO USE Before use Clean the refrigerator. Clean your refrigerator thoroughly and wipe off all dust that accumulated during shipping. CAUTION Do not scratch the refrigerator with a sharp object or use a detergent that contains alcohol, a flammable liquid or an abrasive when removing any tape or adhesive from the refrigerator. Do not peel off the model or serial number label or the technical information on the rear surface of the refrigerator. NOTE Remove adhesive residue by wiping it off with your thumb or dish detergent. Connect the power supply. Check if the power supply is connected before use. Read the "Turning On The Power" section. Wait for the refrigerator to cool. Allow your refrigerator to run for at least two to three hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. CAUTION Putting food in the refrigerator before it has cooled could cause the food to spoil, or a bad odor could remain inside the refrigerator. The refrigerator makes a loud noise after initial operation. This is normal. The volume will decrease as the temperature lowers. Open refrigerator doors to ventilat the interior. Pull-out Tray The inside of the refrigerator may smell like plastic at first. Remove any adhesive tape from inside the refrigerator and open the refrigerator doors for ventilation. IN CASE OF REFRIGERANT LEAK • Do not touch the refrigerator or the outlet and ventilate the room immediately. • The explosion by spark may cause fire or burn. • Because this refrigerator uses natural gas (isobutene, R600a) even a small amount (80~90 g) is combustible. • When the gas is leaked by the severe damage during delivering, installing or using the refrigerator, any spark may cause fire or burn.
![](/manual_guide/products/lg-ltnc11131v-owners-manual-b15e6ab/11.png)