LG MAB745W 01 Service Manual - Page 20

Components, Test Procedure, Results

Page 20 highlights

COMPONENTS TEST PROCEDURE Antenna Gasket Chassis RESULTS HIGH VOLTAGE CAPACITOR Filament NOTE: When testing the magnetron, be sure to install the magnetron gasket in the correct position and be sure that the gasket is in good condition. Measure the resistance. (Ohm-meter scale: Rx1000) • Terminal to terminal. Normal: Momentarily indicates several ohms, and then gradually returns to infinite. Measure the resistance. (Ohm-meter scale: Rx1000) • Terminal to case. Normal: Infinite. HIGH VOLTAGE DIODE Measure the continuity (Forward). (Ohm-meter scale: Rx10000) Normal: Continuity. Abnormal: Infinite. NOTE : Some inexpensive meters may indicate infinite resistance in both direction. Measure the continuity (Reverse). (Ohm-meter scale: Rx10000) Normal: Infinite. Abnormal: Continuity. 5-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

5-9
NOTE: When testing the magnetron, be sure to install the magnetron gasket
in the correct position and be sure that the gasket is in good condition.
Antenna
Gasket
Chassis
Filament
HIGH VOLTAGE
CAPACITOR
Measure the resistance.
(Ohm-meter scale: Rx1000)
Terminal to terminal.
Normal: Momentarily indicates
several ohms, and
then gradually returns
to infinite.
Normal: Infinite.
Normal: Continuity.
Abnormal: Infinite.
Normal: Infinite.
Abnormal: Continuity.
Measure the resistance.
(Ohm-meter scale: Rx1000)
Terminal to case.
Measure the continuity (Forward).
(Ohm-meter scale: Rx10000)
Measure the continuity (Reverse).
(Ohm-meter scale: Rx10000)
HIGH VOLTAGE
DIODE
NOTE :
Some inexpensive meters
may indicate infinite
resistance in both direction.
COMPONENTS
TEST PROCEDURE
RESULTS