LG PB60G Owners Manual - Page 5
Power - electronics
View all LG PB60G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
SAFETY INSTRUCTIONS 5 Power WARNING yyThe earth wire should be connected. - Inappropriate earth grounding may cause damage to the projector or an electric shock when there is an electrical surge. If the projector must be installed at a place where earth grounding is not possible, purchase a circuit breaker and connect the projector to its wall outlet. Do not ground the projector to the gas pipe, water pipe, lightning rod, or telephone line, etc. yyThe power plug should be fully inserted into the wall outlet. - Unstable connection may cause a fire. yyDo not place heavy objects on the power cord or place the cord underneath the projector. - This may cause a fire or an electric shock. yyNever touch the power plug with a wet hand. - This may cause an electric shock. yyDo not connect too many devices to the same power extension. - Overheating may cause a fire. yyRemove dust or contaminants around power plug pins or wall outlets. - This may cause a fire. yyTo turn off the main power, remove the power plug, which should be positioned so it is easy to access for operation. CAUTION yyHold the plug firmly when unplugging. - A broken wire in the cord may cause a fire. yyEnsure the power cord or plug is not damaged, modified, severely bent, twisted, pulled, sandwiched or heated. Do not use a loose wall outlet. - This may cause a fire or an electric shock. yyKeep the power cord away from any heating devices. - The cord coating may melt and cause an electric shock. yyPlace the projector where people will not trip over or tread on the power cord or plug to protect the power cord and plug from any damage. - This may cause a fire hazard or an electric shock. yyDo not turn the projector on or off by plugging in the power plug or unplugging it from the wall outlet. (Do not use the power plug as a switch.) - This may cause an electric shock or damage to the projector. yyDo not insert a conductor into the other side of the wall outlet while the power plug is inserted into the wall outlet. In addition, do not touch the power plug immediately after it is disconnected from the wall outlet. - This may cause an electric shock. yyUse only the official power cord which is provided by LG Electronics, Inc. Do not use other power cords. - This may cause a fire or an electric shock.