LG WM3997HWA Owners Manual - Page 17
Plugging in the Power Cord and, Grounding, Test run
![]() |
View all LG WM3997HWA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
INSTALLATION INSTRUCTIONS 17 ENGLISH Plugging in the Power Cord and Grounding Make sure to ground the washing machine to prevent a short circuit or an electric shock when plugging in. Using a 3-prong outlet If plugged into a grounded, 3-prong outlet rated for use with this appliance, no further grounding is necessary. WARNING yyThe power outlet must be within 60 inches (1.5 m) of either side of the washer. yyThe appliance and outlet must be positioned so that the plug is easily accessible. yyDo not overload the outlet with more than one appliance. yyThe outlet must be grounded in accordance with current wiring codes and regulations. yyTime-delay fuse or circuit breaker is recommended. yyIt is the personal responsibility and obligation of the product owner to have a proper outlet installed by a qualified electrician. yyDo not use a worn or damaged power cord or power plug. Replace or repair worn or damages cords or plugs it immediately. Failure to do so may result in death, fire, electric shock, or malfunction. yyDo not modify the power cord and take care not to damage it when installing or moving the washing machine. Failure to follow this warning may result in death, fire, electric shock, or malfunction. yyMake sure that the washing machine is grounded. yyConnect this washing machine to a grounded outlet conforming to the rating prior to use. Failure to do so may result in fire, electric shock, or malfunction. yyDo not use adaptors or extension cords. The washing machine should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. Failure to do so may result in fire, electric shock or malfunction. yyDo not damage or cut off the ground prong of the power cord. Doing so may cause death, fire, electric shock, or product malfunction. Test run Check if the washing machine is properly installed and run a test cycle. 1 Load the washing machine with 6 pounds of laundry (approximately 14 shirts). 2 Press the Power button and turn the cycle selector knob to the right. 3 Press the Rinse+Spin button to select Rinse+Spin. 4 Press the Start/Pause button. - The wash cycle starts. 5 Check if water is supplied, that the washing machine does not rock or vibrate excessively, and that it drains well during the spin cycle. - If water leaks during water supply, see page 14, Connecting the water lines, to connect them properly. - If the washing machine rocks and vibrates excessively, see page 16, Leveling the washing machine, to level it again. - If the drain does not work, see page 15, Connecting the drain line, to install it properly.
![](/manual_guide/products/lg-wm3997hwa-owners-manual-b492f4c/17.png)