LG WT5001CW Owner's Manual - Page 20

HOW TO USE CYCLE MODIFIER BUTTONS Each cycle has preset settings that are selected automatically. You may also customize the settings using the cycle setting buttons. Press the button for that setting until the indicator light for the desired value is lit. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. It may seem there is no water inside the tub in some cycles, but this is normal. NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle. A beeper will sound and the LED will not light if a selection is not allowed. See the Cycle Guide on page 15 for details. WASH/RINSE Adjust to select the proper water temperature for the wash cycle. It is composed of washing temperature/ rinsing temperature. • Select the water temperature suitable for the type of load you are washing. Follow the fabric care label for best results. • W arm rinses leave the loads drier than cold rinses. Warm rinses can increase wrinkling. • In cold climates, a warm rinse makes the load more comfortable to handle. • Cold rinses use less energy. • U se both hot and cold water supply for optimal results. SOIL LEVEL Adjusts the selected cycle to allow more faster agitation speed for heavily soiled clothes or less slower agitation speed for lightly soiled clothes during the wash and rinse course. Press the SOIL LEVEL button until the indicator light for the desired setting is lit. You can choose between Light, Normal or Heavy soil. • The light will not show on this figure (▼). SPIN SPEED The washer drum spins at up to 1,100 RPM. This reduces drying time and saves energy. Press the SPIN SPEED button until the indicator light for the desired setting is lit. You can change maximum spin speed of spin cycle. Some fabrics, such as delicates, require a slower spin speed. • If you select NO SPIN, the washer turn off without spin cycle after draining. (The cycle time will be reduced by approximately 10 minutes.) SPECIAL USE  Select any additional option, such as RINSE+SPIN, SPIN ONLY, STAIN CARE™ or SOAK • If you press SPECIAL USE button without selecting a cycle, COTTON/ NORMAL cycle with SOAK is automatically selected. NOTE: If you press SPECIAL USE button 3 or 4 times, the cycle will reset to COTTON/NORMAL. ADD GARMENTs Laundry may be added to the load at the proper time in the wash cycle. • ADD GARMENTS is automatically turned on and off. You can not select it by pressing SPECIAL USE button. • If additional items are added during ADD GARMENTS light is off, it may cause unsatisfactory performance. During ADD GARMENTS indicator light on. 1 Press START/PAUSE button to pause the washer. 2 Open the lid after unlocked. 3 Add your additional items. 4 Close the lid. 5 Press START/PAUSE button to resume the washer cycle. The washer will start automatically. NOTE: If the washer remains idle for 8 minutes after pausing the cycle, the water in the tub will drain. 20