LG WT5001CW Owner's Manual - Page 22
Cycle Option Buttons - no power
View all LG WT5001CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
HOW TO USE CYCLE OPTION BUTTONS Your washing machine features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function that can be activated by pressing and holding that option button for 3 seconds. NOTE: To protect your garments, not every wash/ rinse temperature, spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details. EXTRA RINSE This option will add an extra rinse cycle to the selected cycle. Use this option to help ensure the removal of detergent or bleach residue from fabrics. Pressing the EXTRA RINSE button twice will add two additional rinses to the cycle. 1 Press the POWER button to turn on the washer. 2 Turn the cycle selector knob to select the desired cycle. 3 Press the CYCLE MODIFIER buttons to change the desired settings. 4 Press the EXTRA RINSE. • If you want to delete extra rinse, press the EXTRA RINSE three times. COLDWASH™ Use this option to eliminate using the built-in water heater booster. For maximum efficiency, wash only small loads. (less than 8 lbs.) NOTE: If you select STAIN CARE™, the COLDWASH™ option is not available. 1 Press the POWER button to turn on the washer. 2 Turn the cycle selector knob to select the cycle. (Refer to page 15.) 3 Press the COLDWASH™ button. 4 Press the START/PAUSE button to start the cycle. The washer will start automatically. FABRIC SOFTENER The fabric softener is dispensed in the final rinse. Select FABRIC SOFTENER button to change final rinse type from spray rinse to deep rinse. NOTE: LG recommends using FABRIC SOFTENER or EXTRA RINSE options when selecting the COTTON/NORMAL or HEAVY DUTY cycles. NOTE: If you select EXTRA RINSE instead of FABRIC SOFTENER, the fabric softener will be dispensed during the extra rinse course. 5 Press the START/PAUSE button to start the cycle. NOTE: You cannot select the EXTRA RINSE option while the spin cycle. WATER PLUS Select this option to add extra water to the wash and rinse cycles for superior results, especially with large or bulky items. Press and hold the EXTRA RINSE button for 3 seconds to activate or deactivate WATER PLUS. DELAY WASH Once you have selected the cycle and other settings, press this button to delay the start of the wash cycle. Each press of the button increase the delay time, up to 19 hours. 1 Press the START/PAUSE button during wash or rinse cycle.(It is not available in spin cycle) 2 Press and hold the EXTRA RINSE. 3 Press the START/PAUSE button to start the cycle. 4 If you want to use additional water, repeat steps 1 through 3. NOTE: If the machine reaches its maximum water level, the WATER PLUS button will have no effect. NOTE: You cannot select the WATER PLUS option in the SANITARY, TUB CLEAN, and 22 BULKY/BEDDING cycle.