Lantronix EDS8PS EDS - User Guide - Page 119
SMTP Settings, Submit, Remove All, Remove, To con the SMTP network protocol, Protocol Stack
View all Lantronix EDS8PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
14: Maintenance and Diagnostics Settings Table 14-11 ARP Settings Protocol Stack Description ARP Settings (continued) MAC Address Enter the MAC address to add to the ARP cache. Note: Both the IP and MAC addresses are required for the ARP cache. 4. Click Submit for ARP or Add after supplying both address fields for ARP cache. 5. Remove entries from the ARP cache, as desired: Click Remove All to remove all entries in the ARP cache. OR Click Remove beside a specific entry to remove it from the ARP cache. SMTP Settings SMTP is configuration for a basic SMTP proxy. An SMTP proxy in this sense is a simple forwarding agent. Note: Lantronix does not support SMTP AUTH or any other authentication or encryption schemes for email. Please see Email Settings on page 134 for additional information. To configure the SMTP network protocol: 1. Select Protocol Stack on the menu bar. 2. Select SMTP. Figure 14-12 SMTP 3. Modify the following settings: Table 14-13 SMTP Settings Protocol Stack SMTP Settings Relay Address Remote Port Description Address of all outbound email messages through a mail server. Can contain either a hostname or an IP address. Port utilized for the delivery of outbound email messages. 4. Click Submit. EDS User Guide 119