Lantronix EDS8PS EDS - User Guide - Page 81
FTP Settings, Submit., To con FTP
View all Lantronix EDS8PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
11: Service Settings SNMP Settings State Read Community Write Community System Contact System Name System Description System Location Traps State Traps Primary Destination Traps Secondary Destination Table 11-3 SNMP Description Select Enabled to enable SNMP. Enter the SNMP read-only community string. Enter the SNMP read/write community string. Enter the name of the system contact. Enter the system name. Enter the system description. Enter the system location. Select Enabled to enable the transmission of SNMP Traps. The Cold Start trap is sent on device boot up, and the Linkdown trap is sent when the device is rebooted from software control. Enter the primary SNMP trap host. Enter the secondary SNMP trap host. 3. Click Submit. FTP Settings The FTP web page shows the current File Transfer Protocol (FTP) configuration and various statistics about the FTP server. To configure FTP: 1. Select FTP on the menu bar. The FTP page opens to display the current configuration. EDS User Guide 81