Lantronix EDS8PS EDS - User Guide - Page 120

IP Address Filter, To con the IP address filter, IP Address Filter Settings, Remove

Get Lantronix EDS8PS PDF manuals and user guides View all Lantronix EDS8PS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 120 highlights

14: Maintenance and Diagnostics Settings IP Address Filter The IP address filter specifies the hosts and subnets permitted to communicate with the EDS device. When the filter list is empty, then all IP addresses are allowed. Note: If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list. To configure the IP address filter: 1. Select IP Address Filter on the menu bar. The IP Address Filter page opens to display the current configuration. Figure 14-14 IP Address Filter Configuration Note: If you enter any filter, be careful to make sure that your network IP address is covered. Otherwise you will loose access to the EDS. You will have to then access the EDS from a different computer to reset the configuration. 2. Enter or modify the following settings: IP Address Filter Settings IP Address Network Mask 3. Click Add. Table 14-15 IP Address Filter Settings Description Enter the IP address to add to the IP filter table. Enter the IP address' network mask in dotted notation. Note: In the Current State table, click Remove to delete any existing settings, as necessary. EDS User Guide 120

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
14: Maintenance and Diagnostics Settings
EDS User Guide
120
IP Address Filter
The IP address filter specifies the hosts and subnets permitted to communicate with the
EDS
device. When the filter list is empty, then all IP addresses are allowed.
Note:
If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list.
To configure the IP address filter:
1.
Select
IP Address Filter
on the menu bar. The IP Address Filter page opens to display the
current configuration.
Figure 14-14
IP Address Filter Configuration
Note:
If you enter any filter, be careful to make sure that your network IP address is
covered.
Otherwise you will loose access to the EDS.
You will have to then access the
EDS from a different computer to reset the configuration.
2.
Enter or modify the following settings:
Table 14-15
IP Address Filter Settings
3.
Click
Add.
Note:
In the Current State table, click
Remove
to delete any existing settings, as
necessary.
IP Address Filter
Settings
Description
IP Address
Enter the IP address to add to the IP filter table.
Network Mask
Enter the IP address’ network mask in dotted notation.