Lantronix SISTP1040-551-LRT SISTP1040-551-LRT Install Guide Rev B - Page 12

Lantronix SISTP1040-551-LRT Install Guide Ethernet Interface Connection (Fiber, SFP) 100/1000 Mbps fiber port: Insert an MSA compliant 100 Mbps or 1000 Mbps small form pluggable transceiver (SFP) in the SFP slot. For each fiber port there is a transmit (TX) and receive (RX) signal. Make sure that the transmit (TX) port of the switch connects to the receive (RX) port of the other device, and the receive (RX) port of the switch connects to the transmit (TX) port of the other device when making your fiber optic connections. Note: see the related SFP device manual for important Safety warnings. See the Lantronix SFP page for our full line of SFP transceivers. See the FOA webpage for additional information. The Fiber Optic Association, Inc.is an international non-profit educational association chartered to promote professionalism in fiber optics through education, certification and standards. DANGER: Never attempt to view optical connectors that might be emitting laser energy. Do not power up the laser product without connecting the laser to the optical fiber and putting the cover in position, as laser outputs will emit infrared laser light at this point. 33841 Rev. B https://www.lantronix.com/ Page 12 of 26