Lantronix SISTP1040-551-LRT SISTP1040-551-LRT Install Guide Rev B - Page 7

Lantronix SISTP1040-551-LRT Install Guide 2 Installation Package Checklist Verify that the box contains these items: One SISTP1040-551-LRT switch Two Wall-mount brackets One DIN-Rail Clip Four M4 Screws (for Wall mount brackets and DIN Clip) One DC power Terminal Block One printed Quick Start Guide One documentation postcard Contact your sales representative if any item is missing. Please save the packaging for possible future use. Note that a Power Supply is not included with the switch (sold separately). An optional second Power Supply can be ordered separately to provide dual power capability. Cautions and Warnings The following conventions are used in this manual to emphasize information important to the reader. Danger : The described activity or situation might or will cause personal injury. Warning : The described activity or situation might or will cause equipment damage. Caution : The described activity or situation might or will cause service interruption. Note : The information supplements the text or highlights important points. Safety Instructions When a connector is removed during installation, testing, or servicing, or when an energized fiber is broken, a risk of ocular exposure to optical energy that may be potentially hazardous occurs, depending on the laser output power. The primary hazards of exposure to laser radiation from an optical-fiber system are: • Damage to the eye by accidental exposure to a beam emitted by a laser source. • Damage to the eye from viewing a connector attached to a broken fiber or an energized fiber. Protective earthing is used as a safeguard (required when class I power source was provided). The equipment power supply cord shall be connected to a socket-outlet with earthing connection, or equivalent This equipment is only to be connected to PoE networks without routing to outside plants. DC power source: If the DC power source doesn't ship with the unit: This product is intended to be supplied by a Listed DC power source whose output is rated 48-57Vdc, 8A minimum and Tma 75 degrees C. Optional transceiver source: The product is intended to be used with UL approved optional transceiver laser Class I, rated 3.3V. 33841 Rev. B https://www.lantronix.com/ Page 7 of 26