Lantronix XPress-DR UDS1100-IAP - Multi-Master DF1 Protocol User Guide - Page 12

3: Configuring Multi-Master DF1 Which entry number DST from (000) 101 DST to (000) 254 Slave IP address (192) .(168) .(000) .(000) MSG Block Remote IP routing Table: 1) 000-100: 192.168.000.024 (* Fixed IP *) 2) 101-254: 192.168.000.000 (* DST as low octet of IP *) 3) 000-000: --- not set --- 4) 000-000: --- not set --- 5) 000-000: --- not set --- C)hange D)elete, E)xit - select function ‹ You have the option to change or delete an entry. You will be asked which of the five entries you want to change or delete. ‹ Deleting an entry just clears it. ‹ When changing an entry, you will be asked for the minimum and maximum DST address to include in the entry. These are inclusive-so in the example above, entry #1 includes DST = 0 to 100. You will also be asked for the remote IP to use for this range of DST addresses. 1. On lines 1-5, enter the fixed and/or dynamic IP addresses or address ranges that correspond to the message blocks in your PLC or serial device. Press Enter between each entry. 2. Press Enter. The window refreshes and displays all of your entries. Note: You must save your settings to apply them. Multi-Master DF1 Protocol User Guide 11