Lenovo B520e IdeaCentre B520e Hardware Maintenance Manual (English) - Page 33
Removing the computer stand, Remove any media disks, CDs, or memory cards from the drives
View all Lenovo B520e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Step 3. Step 4. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Slide up the back deco to remove it. Removing the computer stand Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: For this procedure, it helps to place the computer face-down on a soft flat surface. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage. To remove the computer stand: Step 1. Step 2. Step 3. Step 4. Step 5. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Remove the computer cover. Refer to "Removing the computer cover". Remove the 6 screws that secure the stand to the chassis, and then slide the stand up and out. Chapter 8. Replacing hardware 27