Lenovo B520e IdeaCentre B520e Hardware Maintenance Manual (English) - Page 37

Replacing the hard disk drive, or other damage.

Get Lenovo B520e PDF manuals and user guides View all Lenovo B520e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Step 11. Install the new optical drive as follows: a. Align the new optical drive with the cover, then push the cover back into position. b. Secure the metal bracket onto the new optical drive using the 2 screws. c. Slide the new optical drive into the drive bay. Step 12. Secure the new optical drive to the chassis using the screw. Step 13. Slide the computer cover back into position. Replacing the hard disk drive Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage. To replace the hard disk drive: Step 1. Step 2. Step 3. Remove the computer cover. Refer to "Removing the computer cover". Loosen the screw that secures the hard disk drive bay to the chassis. Spring up the handle on the hard disk drive bay, and then slide the hard disk drive bay out of the chassis as shown. Chapter 8. Replacing hardware 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Step 11. Install the new optical drive as follows:
a.
Align the new optical drive with the cover, then push the cover back into position.
b.
Secure the metal bracket onto the new optical drive using the 2 screws.
c.
Slide the new optical drive into the drive bay.
Step 12. Secure the new optical drive to the chassis using the screw.
Step 13. Slide the computer cover back into position.
Replacing the hard disk drive
Attention:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note:
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To replace the hard disk drive:
Step 1.
Remove the computer cover. Refer to “Removing the computer cover”.
Step 2.
Loosen the screw that secures the hard disk drive bay to the chassis.
Step 3.
Spring up the handle on the hard disk drive bay, and then slide the hard disk drive bay out of
the chassis as shown.
Chapter 8
.
Replacing hardware
31