Lenovo E4325 Laptop User Guide - Lenovo E4325 - Page 44

Pivot the memory module downward until it snaps into place. Ensure that the memory module is

Get Lenovo E4325 Laptop PDF manuals and user guides View all Lenovo E4325 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

1 1 2 2 5. If one memory module is already in the memory slot, press out on the latches on both edges of the socket at the same time 3 , and then remove the memory module to make room for the new one 4 . Save the removed memory module for future use. 3 3 4 6. Align the notch on the contact edge of the new memory module with the key in the memory slot and then carefully insert the memory module into the slot at an angle of about 20 degrees 5 . Ensure that you press the new memory module firmly into the slot 6 . Attention: To avoid damaging the memory module, do not touch its contact edge. 6 5 7. Pivot the memory module downward until it snaps into place. Ensure that the memory module is installed firmly in the slot and cannot be moved easily. 8. Reinstall the bottom slot cover, and then reinstall the screws to secure the cover. 9. Reinstall the battery pack. See "Replacing the battery pack" on page 25. 10. Turn the computer over again. Connect the ac power adapter and all cables. 30 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
2
2
1
1
5. If one memory module is already in the memory slot, press out on the latches on both edges of the
socket at the same time
3
, and then remove the memory module to make room for the new one
4
.
Save the removed memory module for future use.
4
3
3
6. Align the notch on the contact edge of the new memory module with the key in the memory slot and
then carefully insert the memory module into the slot at an angle of about 20 degrees
5
. Ensure that
you press the new memory module firmly into the slot
6
.
Attention:
To avoid damaging the memory module, do not touch its contact edge.
6
5
7. Pivot the memory module downward until it snaps into place. Ensure that the memory module is
installed firmly in the slot and cannot be moved easily.
8. Reinstall the bottom slot cover, and then reinstall the screws to secure the cover.
9. Reinstall the battery pack. See “Replacing the battery pack” on page 25.
10. Turn the computer over again. Connect the ac power adapter and all cables.
30
User Guide