Lenovo G460 Lenovo G460/G560 User Guide V1.0 - Page 40

Upgrading and replacing devices, Replacing the battery - battery replacement

Page 40 highlights

Chapter 6. Upgrading and replacing devices Notes: • The illustrations used in this chapter are of the Lenovo G560, unless otherwise stated. • The following steps about upgrading and replacing devices are the same for the G460 and G560. Replacing the battery Note: Use only the battery provided by Lenovo. Any other battery could ignite or explode. To replace the battery 1 Turn off the computer, or enter hibernation mode. Disconnect the AC adapter and all cables from the computer. Note: If you are using an ExpressCard device, the computer might not be able to enter hibernation mode. If this happens, turn off the computer. 2 Close the computer display, and turn the computer over. 3 Unlock the manual battery latch a. Holding the spring-loaded battery latch in the unlocked position b, remove the battery pack in the direction shown by the arrow c. a1 c b 4 Install a fully charged battery. 5 Slide the manual battery latch to the locked position. 6 Turn the computer over again. Connect the AC adapter and the cables to the computer again. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

32
Chapter 6. Upgrading and replacing devices
Replacing the battery
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the battery
1
Turn off the computer, or enter hibernation mode. Disconnect the AC adapter and all cables
from the computer.
2
Close the computer display, and turn the computer over.
3
Unlock the manual battery latch
. Holding the spring-loaded battery latch in the
unlocked position
, remove the battery pack in the direction shown by the arrow
4
Install a fully charged battery.
5
Slide the manual battery latch to the locked position.
6
Turn the computer over again. Connect the AC adapter and the cables to the computer again.
Notes:
The illustrations used in this chapter are of the Lenovo G560, unless otherwise stated.
The following steps about upgrading and replacing devices are the same for the G460 and G560.
Note:
Use only the battery provided by Lenovo. Any other battery could ignite or explode.
Note:
If you are using an ExpressCard device, the computer might not be able to enter hibernation mode. If
this happens, turn off the computer.
a
b
c
b
1
a
c