Lenovo IdeaCentre K230 Hardware Maintenance Manual for K220 - Page 24
Exiting from the Setup Utility program
View all Lenovo IdeaCentre K230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chapter 5. Using the Setup Utility the F12 key rather than leaving it pressed when turning on the computer. 3. Select the desired startup device from the Startup Device Menu and press Enter to begin. Note: Selecting a startup device from the Startup Device menu does not permanently change the startup sequence. Selecting or changing the startup device sequence To view or permanently change the configured startup device sequence, do the following: 1. Start the Setup Utility program (see "Starting the Setup Utility program" on page 16). 2. Select Advanced BIOS Features. 3. Select the devices for the 1st Boot Device, the 2nd Boot Device, the 3rd Boot Deviece and the 4th Boot Device. 4. Press ESC to return the Advanced BIOS Features and then Save changes and Exit. If you have changed these settings and want to return to the default settings, select Load Optimal Defaults on the Setup Utility menu. Exiting from the Setup Utility program When you finish viewing or changing settings, press Esc to return to the Setup Utility program menu (you might have to press Esc several times). If you want to save the new settings, select Save changes and Exit before you exit. Otherwise, your changes will not be saved. 21