Lenovo IdeaPad S9 Lenovo IdeaPad S9-S10 UserGuide V2.0 - Page 36
Set Supervisor Password, Enter, Enter Current Password, Password on boot, Enabled
View all Lenovo IdeaPad S9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 2. Using your computer Changing or removing the supervisor password To change the password, do the following: 1 Select Set Supervisor Password, and press the Enter key. The Set Supervisor Password window opens. 2 Select Enter Current Password and type in the correct password. Then press Enter key once to move to Enter New Password field, type a new supervisor password in. 3 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 4 Commit your password to memory, and press the Enter key. To remove password, do the following: 1 Select Set Supervisor Password, and press the Enter key. 2 Select Enter Current Password and type in the correct password, and press the Enter key thrice. Note: Make sure the Password on boot is set to Enabled if you need the password protection at power on. 28