Lenovo IdeaPad U260 Lenovo IdeaPad U260 Hardware Maintenance Manual - Page 46

LCD unit, 1040 PCI Express Mini Card for wireless LAN

Get Lenovo IdeaPad U260 PDF manuals and user guides View all Lenovo IdeaPad U260 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

IdeaPad U260 Hardware Maintenance Manual 1050 LCD unit For access, remove these FRUs in order: •• "1010 Keyboard" on page 34 •• "1020 Keyboard bezel" on page 35 •• "1030 Battery pack" on page 39 •• "1040 PCI Express Mini Card for wireless LAN" on page 40 Figure 5. Removal steps of LCD unit Unplug the LCD connector in the direction shown by arrow 1. Remove four screws 2. Release the LCD cable from the cable guides in the direction shown by arrows 3. 22 3 3 1 22 Step 2 Screw (quantity) M2.5 × 5 mm, flat-head, nylok-coated (4) Color Torque Black 1.5~2.0 kgfcm When installing: •• Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. •• Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
42
IdeaPad U260 Hardware Maintenance Manual
1050 LCD unit
For access, remove these FRUs in order:
•
“1010 Keyboard” on page 34
•
“1020 Keyboard bezel” on page 35
•
“1030 Battery pack” on page 39
•
“1040 PCI Express Mini Card for wireless LAN” on page 40
Figure 5. Removal steps of LCD unit
Unplug the LCD connector in the direction shown by arrow
1
. Remove four
screws
2
. Release the LCD cable from the cable guides in the direction shown
by arrows
3
.
1
2
2
2
2
3
3
Step
Screw (quantity)
Color
Torque
2
M2.5 × 5 mm, flat-head, nylok-coated (4)
Black
1.5~2.0 kgfcm
When installing:
Route the antenna cables along the cable guides. As you route the cables,
•
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached firmly and make sure that you
•
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.