Lenovo IdeaPad U260 Lenovo IdeaPad U260 Hardware Maintenance Manual - Page 56

Note: Applying labels to the base cover, W/L Label US/CA/TW/Israel/Indonesia

Page 56 highlights

IdeaPad U260 Hardware Maintenance Manual Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following label: The following labels need to be peeled off from the old base cover, and need to be put on the new base cover. a PRC CODE Label b COA Label c SIRIM W/L Label d SIRIM B/T Label e W/L Label US/CA/TW/Israel/Indonesia f B/T Label (US/CA/TW/Indonesia) g W/L Label (Brazil) h B/T Label (Brazil) For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover. For the location of each label, refer to the following figure: c e g a b h f d 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77

52
IdeaPad U260 Hardware Maintenance Manual
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
label:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
a
PRC CODE Label
b
COA Label
c
SIRIM W/L Label
d
SIRIM B/T Label
e
W/L Label US/CA/TW/Israel/Indonesia
f
B/T Label (US/CA/TW/Indonesia)
g
W/L Label (Brazil)
h
B/T Label (Brazil)
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
a
b
c
e
g
h
f
d