Lenovo J110 Hardware Maintenance Manual - Page 57

Diskette drive Cable, 2XX-XXX 005-3XX-XXX

Get Lenovo J110 PDF manuals and user guides View all Lenovo J110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Diagnostic Error Code 005-199-XXX Video test failed, cause unknown 005-2XX-XXX 005-3XX-XXX Video subsystem error 006-000-XXX Diskette interface Test Passed 006-0XX-XXX Diskette interface error 006-195-XXX Diskette interface Test aborted by user 006-196-XXX Diskette interface test halt, error threshold exceeded 006-197-XXX Diskette interface test warning 006-198-XXX Diskette interface test aborted 006-199-XXX Diskette interface test failed, cause unknown 006-25X-XXX Diskette interface Error 011-000-XXX Serial port Interface Test Passed 011-001-XXX Serial port Presence 011-002-XXX 011-003-XXX Serial port Timeout/Parity error 011-013-XXX 011-014-XXX Serial port Control Signal/Loopback test failure 011-015-XXX Serial port External Loopback failure FRU/Action 1. Go to "Undetermined problems" on page 67 2. Flash the system and re-test. See "Flash update procedures" on page 185 3. Replace component under function test 1. Video card, if installed 2. System board No action 1. Diskette drive Cable 2. Diskette drive 3. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. If a component is called out, make sure it is connected and/or enabled 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test. See "Flash update procedures" on page 185 3. Go to "Undetermined problems" on page 67 1. Go to "Undetermined problems" on page 67 2. Flash the system and re-test 3. Replace component under function test 1. Diskette drive cable 2. Diskette drive 3. System board No action 1. Remove external serial device, if present 2. Run setup, enable port 3. System board System board System board 1. Wrap plug 2. System board Chapter 7. Symptom-to-FRU Index 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
Diagnostic Error Code
FRU/Action
005-199-XXX
Video test failed, cause unknown
1.
Go to “Undetermined problems” on page 67
2.
Flash the system and re-test. See “Flash update
procedures” on page 185
3.
Replace component under function test
005-2XX-XXX 005-3XX-XXX
Video subsystem error
1.
Video card, if installed
2.
System board
006-000-XXX
Diskette interface Test Passed
No action
006-0XX-XXX
Diskette interface error
1.
Diskette drive Cable
2.
Diskette drive
3.
System board
006-195-XXX
Diskette interface Test aborted by user
Information only
Re-start the test, if necessary
006-196-XXX
Diskette interface test halt, error threshold
exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
006-197-XXX
Diskette interface test warning
1.
If a component is called out, make sure it is
connected and/or enabled
2.
Re-run test
3.
Replace the component that is called out in warning
statement
4.
Replace the component under test
006-198-XXX
Diskette interface test aborted
1.
If a component is called out, make sure it is
connected and/or enabled
2.
Flash the system and re-test. See “Flash update
procedures” on page 185
3.
Go to “Undetermined problems” on page 67
006-199-XXX
Diskette interface test failed, cause
unknown
1.
Go to “Undetermined problems” on page 67
2.
Flash the system and re-test
3.
Replace component under function test
006-25X-XXX
Diskette interface Error
1.
Diskette drive cable
2.
Diskette drive
3.
System board
011-000-XXX
Serial port Interface Test Passed
No action
011-001-XXX
Serial port Presence
1.
Remove external serial device, if present
2.
Run setup, enable port
3.
System board
011-002-XXX 011-003-XXX
Serial port Timeout/Parity
error
System board
011-013-XXX 011-014-XXX
Serial port Control
Signal/Loopback test failure
System board
011-015-XXX
Serial port External Loopback failure
1.
Wrap plug
2.
System board
Chapter 7
.
Symptom-to-FRU Index
51