Lenovo N20 Chromebook Hardware Maintenance Manual - Lenovo N20 Chromebook - Page 48

Remove the hinges, the LCD cable, and the WLAN antennas, Hinges left and right

Page 48 highlights

Refer to Table 4 "Part numbers for LCD FRUs" on page 26 to look up the Lenovo part numbers of the following replacement parts: LCD panel LCD cable Remove the hinges, the LCD cable, and the WLAN antennas Make sure the following FRUs (CRUs) have been removed: "Remove the LCD bezel" on page 40 "Remove the LCD panel" on page 41 Step 1. Remove the two screws 1 and then remove the left and right hinges 2 . a b a b Figure 29. Remove the hinges Step 2. Release the LCD cable out of cable guides. Step 3. Release the antenna cables out of the cable guides; peel the left and right antennas off the LCD base cover and then remove the antennas 3 . c c Figure 30. Remove WLAN antennas Table 13. Screw specifications - removing the hinges and the WLAN antennas Screw label 1 Specifications M2.5 × 3.5 mm, flat-head, nylon-coated Color Silver Torque 3.7 - 4.0 kgf * cm Refer to Table 4 "Part numbers for LCD FRUs" on page 26 to look up the Lenovo part numbers of the following replacement parts: Hinges (left and right) LCD cable Antennas (left and right) 42 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

RefertoTable4“PartnumbersforLCDFRUs”onpage26tolookuptheLenovopartnumbersofthe
followingreplacementparts:
LCD panel
LCD cable
Remove the hinges, the LCD cable, and the WLAN antennas
MakesurethefollowingFRUs(CRUs)havebeenremoved:
“RemovetheLCDbezel”onpage40
“RemovetheLCDpanel”onpage41
Step 1. Remove the two screws
1
andthenremovetheleftandrighthinges
2
.
Figure29. Remove the hinges
Step 2. Release the LCD cable out of cable guides.
Step3.Releasetheantennacablesoutofthecableguides;peeltheleftandrightantennasofftheLCD
basecoverandthenremovetheantennas
3
.
Figure30. Remove WLAN antennas
Table 13. Screw specifications — removing the hinges and the WLAN antennas
Screw
label
Specifications
Color
Torque
1
M2.5×3.5mm,flat-head,nylon-coated
Silver
3.7—4.0kgf*cm
RefertoTable4“PartnumbersforLCDFRUs”onpage26tolookuptheLenovopartnumbersofthe
followingreplacementparts:
Hinges (left and right)
LCD cable
Antennas (left and right)
42
HardwareMaintenanceManual