Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2271, 6840, and - Page 64
No-beep symptoms, Power-On Self-Test
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Beep Symptom FRU/Action 3-3-4 Screen initialization failed 1. Video Adapter (if installed) 2. System Board Display 3-4-1 Screen retrace test detected an error 1. Video Adapter (if installed) 2. System Board 3. Display 3-4-2 POST is searching for video ROM 1. Video Adapter (if installed) 2. System Board 4 1. Video Adapter (if installed) 2. System Board All other beep code sequences 1. System Board One long and one short beep during POST. 1. Memory Module Base 640 KB memory error or shadow RAM error 2. System Board One long beep and two or three short beeps 1. Video Adapter (if installed) during POST. (Video error) 2. System Board Three short beeps during POST 1. See "System board memory" on page 30. 2. System Board Continuous beep 1. System Board Repeating short beeps 1. Keyboard stuck key? 2. Keyboard Cable 3. System Board No-beep symptoms Important: Type 2271/6840/6841 computers default to come up quiet (no beep and no memory count and checkpoint code display) when no errors are detected by POST. To enable beep and memory count and checkpoint code display when a successful POST occurs, do the following: 1. Select Start Options in the Configuration/Setup Utility program (see "Setup Utility program" on page 7). 2. Set Power-On Self-Test to Enhanced. Symptom/Error No beep during POST but computer works correctly. FRU/Action 1. System Board 58 Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer