Lenovo S205 Hardware Maintenance Manual - Page 109
Completing
View all Lenovo S205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
21. Reconnect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at "Locating parts on the system board" on page 87. 22. Install the new system board into the chassis and align the screw holes with those in the chassis. Insert and tighten the screws that secure the system board. 23. Reconnect all cables that were disconnected from the system board. 24. Reinstall the hard disk drive. See "Replacing the hard disk drive" on page 112. 25. Align the drive bay assembly with the two slots and rails on the sides of the chassis, reconnect the drive cables on the system board, and then slide the drive bay assembly towards the rear of the chassis until it snaps into position. 26. Reinstall the front bezel. 27. Reinstall any PCI adapter cards that were removed. 28. Position the fan duct on the heat sink fan. 29. Go to "Completing the FRU replacement" on page 120. Chapter 8. Replacing FRUs - Desktop computers 103