Lenovo S205 Hardware Maintenance Manual - Page 139
machine
View all Lenovo S205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
18. Lower the microprocessor straight down into the system board socket of the new system board. 19. Lower the small handle to secure the microprocessor in the socket. 20. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at "Locating parts on the system board" on page 125. 21. Install the new system board into the chassis and align the screw holes with those in the chassis. Insert and tighten the screws that secure the system board. 22. Pivot the hard disk drive back into position. 23. Connect the power and signal cables to the hard disk drive. 24. Connect all cables to the system board. See the system board illustration for your machine type at "Locating parts on the system board" on page 125. 25. Go to "Completing the FRU replacement" on page 161. Chapter 9. Replacing FRUs - Tower Computers 133