Lenovo S50-30 Lenovo S50-30 All-In-One PC Hardware Maintenance Manual - Page 38

Replacing the hard disk drive, cables

Get Lenovo S50-30 PDF manuals and user guides View all Lenovo S50-30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

a. Line up the pins on the computer cover with the mounting holes on the chassis, then put the computer cover back in place. b. Secure the computer cover to the chassis with the two screws. Step 7. Reattach the computer stand. Replacing the hard disk drive Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover. To replace the hard disk drive: Step 1. Step 2. Step 3. Step 4. Step 5. Step 6. Step 7. Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Remove the computer stand. Refer to "Removing the frame stand", "Removing the monitor stand", or "Removing the transformer stand". Remove the rear cover. Refer to "Removing the rear cover". Remove the hard disk drive assembly as shown. 1 2 Disconnect the data and power cable from the hard disk drive. 3 32 Lenovo S50-30 All-In-One PC Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
a.
Line up the pins on the computer cover with the mounting holes on the chassis, then put
the computer cover back in place.
b.
Secure the computer cover to the chassis with the two screws.
Step 7.
Reattach the computer stand.
Replacing the hard disk drive
Attention:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.
To replace the hard disk drive:
Step 1.
Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4.
Remove the computer stand. Refer to “Removing the frame stand”, “Removing the monitor stand”,
or “Removing the transformer stand”.
Step 5.
Remove the rear cover. Refer to "Removing the rear cover".
Step 6.
Remove the hard disk drive assembly as shown.
1
2
Step 7.
Disconnect the data and power cable from the hard disk drive.
3
32
Lenovo S50-30 All-In-One PC Hardware Maintenance Manual