Lenovo S5000 S5000-F / S5000-H Hardware Maintenance Manual - Page 35
SIM sub board, Important notices for handling PCB
![]() |
View all Lenovo S5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Lenovo S5000 1030 SIM sub board Important notices for handling PCB: When handling PCB, bear the following in mind: • Be careful not to drop the PCB onto a bench top that has a hard surface, such as surface made of metal, wood, or composite materials. • Avoid rough handling of any kind. • Make sure not to drop or stack the PCB in the whole process. • Make sure to put the PCB only on surface covered with materials such as an ESD mat or conductive corrugated plate. For access, remove the following FRU in order: • "1010 SIM card holder" on page 28 • "1020 Rear cover and side key" on page 29 1. Remove 2 screws a on the SIM sub board. Figure 3-1. Screws fixing the SIM sub board 31
![](/manual_guide/products/lenovo-s5000-s5000f-s5000h-hardware-maintenance-manual-56c50f0/35.png)
Lenovo S5000
31
1030 SIM sub board
For access, remove the following FRU in order:
•
“1010 SIM card holder” on page 28
•
“1020 Rear cover and side key” on page 29
1.
Remove 2 screws
on the SIM sub board.
Figure 3-1. Screws fixing the SIM sub board
Important notices for handling PCB:
When handling PCB, bear the following in mind:
•
Be careful not to drop the PCB onto a bench top that has a hard surface,
such as surface made of metal, wood, or composite materials.
•
Avoid rough handling of any kind.
•
Make sure not to drop or stack the PCB in the whole process.
•
Make sure to put the PCB only on surface covered with materials such as
an ESD mat or conductive corrugated plate.
a