Lenovo S5000 S5000-F / S5000-H Hardware Maintenance Manual - Page 49
Main PCBA
![]() |
View all Lenovo S5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Lenovo S5000 1110 Main PCBA Important notices for handling PCB: When handling PCB, bear the following in mind: • Be careful not to drop the PCB onto a bench top that has a hard surface, such as surface made of metal, wood, or composite materials. • Avoid rough handling of any kind. • Make sure not to drop or stack the PCB in the whole process. • Make sure to put the PCB only on surface covered with such materials as an ESD mat or conductive corrugated plate. For access, remove the following FRUs in order: • "1010 SIM card holder" on page 28 • "1020 Rear cover and side key" on page 29 • "1030 SIM sub board" on page 31 • "1040 Speaker box" on page 33 • "1050 Rear frame" on page 35 • "1060 Main camera and sub camera" on page 37 • "1070 Battery FPC connector holder" on page 39 • "1080 Antenna assembly" on page 40 • "1090 RF cables" on page 41 1. Remove 2 screws a fixing the main PCBA to the main body. Figure 11-1. Screws on the main PCBA 45
![](/manual_guide/products/lenovo-s5000-s5000f-s5000h-hardware-maintenance-manual-56c50f0/49.png)