Lenovo SL400 Service Guide - Page 38
Restoring the factory contents from the service partition, Restoring the factory contents using - screen
UPC - 884942194863
View all Lenovo SL400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Attention: v All files on the primary storage drive partition (usually drive C) will be deleted in the recovery process. However, before any data is overwritten, you will be given the opportunity to save one or more files to other media. v If your optical drive is not attached to your ThinkPad computer during recovery, DVD software and CD-recording software will not be installed. To ensure that they will be installed correctly, install the optical drive before performing a recovery operation. v Recovery takes several hours. The length of time depends on the method you use. If you use recovery discs which you have created or purchased, recovery takes at least five hours. Before restoring the system, initialize the settings of the BIOS Setup Utility: 1. Enter BIOS Setup Utility. 2. Press F9 to restore the default system settings. Select Yes and press Enter. 3. Press F10 to save the system settings. Select Yes and press Enter. The computer will restart. Restoring the factory contents from the service partition 1. If possible, save all your files and shut down your operating system. 2. Turn off the computer, and then turn it on again. 3. When the ThinkPad logo comes up, immediately press the Lenovo Care button, F11, or Enter key. The Rescue and Recovery workspace opens. 4. Click Full Restore and follow the instructions on the screen. Restoring the factory contents using the recovery discs If a set of recovery discs is enclosed with your computer, or you have created or purchased recovery discs, you can restore the factory contents by using the discs in the following procedure: 1. Make sure that in the BIOS Setup Utility the startup sequence is set so that the system starts up from the recovery discs. 2. Insert the Rescue and Recovery disc into the DVD drive. 3. Restart the computer. After a short wait, the Rescue and Recovery workspace opens. 4. Click Full Restore and follow the instructions on the screen. 30 ThinkPad® SL300, SL400, and SL500 Service and Troubleshooting Guide