Lenovo ThinkPad 570E ThinkPad 570 On-line User's Guide - Page 76
Default resource assignments, To see the default resource assignment, go to the appropriate,
View all Lenovo ThinkPad 570E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Function PCI Bus Power Management Alarm Power control beep Selection Disable Automatic Disabled Enabled Low-battery alarm Volume beep Other Resetting configuration data Booting the display device HV expansion Brightness Startup screen RPL token ring speed Disabled Enabled Disabled Enabled No Yes LCD CRT Both Off On High Normal Enabled Disabled 4 16 Comments You can enable or disable this power-saving feature, which stops the PCI bus clock automatically when there is no system activity. You usually don't need to change the function. If you enable this function, a beep sounds when the computer enters a power management mode and when it resumes operational mode. There is also a beep when the AC Adapter is connected or disconnected. You can enable or disable the low-battery alarm. If you enable this function, a beep sounds when you change the volume by pressing Fn+PgUp or PgDn. Select Yes if you want to reset your configuration data. You can select the boot video device. You can control the LCD horizontal and vertical expansion state. If you select High, the brightness of the LCD is always the same under either ac power or battery power. High diminishes the battery power. If you enable this function, the IBM logo always appears on the LCD when the computer boots. If you user the remote program loading (RTP) system through the token ring card, you can set its speed. Default resource assignments To see the default resource assignment, go to the appropriate section: 70 IBM ThinkPad 570 Online Book