Lenovo ThinkPad SL400 Hardware Maintenance Manual - Page 48
failing - driver
View all Lenovo ThinkPad SL400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Table 1. Numeric error codes (continued) Symptom or error 7001 (HDCP) Memory is not enough for HDCP Key Provisioning! 7002 (HDCP) Failed to check the key set Family-EKS! 7003 (HDCP) Chip-Unique-EKS re-encryption failed! 7004 (HDCP) Failed to check the key set Chip-Unique-EKS! 7005 (HDCP) Cipher Initialization with Chip-Unique-EKS failed! 8100 Gate20 Error 8101 Multi-Bit ECC Error 8102 Parity Error 8103 RAM R/W test failed 8104 CMOS Memory Size Wrong 8200 Boot Failure ... 8201 Invalid Boot Diskette 8202 Drive Not Ready 8203 A: Drive Error 8204 B: Drive Error 8205 Insert BOOT diskette in A: 8206 Reboot and Select proper Boot device or Insert Boot Media in selected Boot device 8207 NO ROM BASIC FRU or action, in sequence Add the DIMMs. System board. System board. System board. System board. 1. System board. 2. DIMM. 1. DIMM. 2. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. Reseat the boot device. Confirm that boot image is stored in the failing device. Confirm that boot image is stored in the failing diskette. Confirm that the boot media is installed in the driver. Reseat the diskette drive. 1. Diskette drive. 2. USB cable (if diskette drive has removal USB cable.) Reseat the diskette drive. 1. Diskette drive. 2. USB cable (if diskette drive has removal USB cable.) Reaset the diskette cable. Confirm that boot image is stored in the failing diskette. Reseat the bootable devices. Confirm that the bootable device or media is in the system. Reseat the bootable devices. Confirm that the bootable device or media is in the system. 40 ThinkPad SL400, SL400c, SL500, and SL500c Hardware Maintenance Manual