Lenovo ThinkPad SL400 Hardware Maintenance Manual - Page 50
confirming - unlock
View all Lenovo ThinkPad SL400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 1. Numeric error codes (continued) Symptom or error 850D PCI IRQ routing table error 850E Timer Error 850F Refresh timer test failed 8510 Interrupt Controller-1 error 8511 Interrupt Controller-2 error 8600 CMOS Date/Time Not Set 8601 CMOS Battery Low 8602 CMOS Settings Wrong 8603 CMOS Checksum Bad 8700 KBC BAT Test failed 8701 Keyboard Error 8702 PS2 Keyboard not found 8703 PS2 Mouse not found 8704 Keyboard/Interface Error 8705 Unlock keyboard 8706 System Halted 8707 Pressed 8708 Password check failed FRU or action, in sequence Update the BIOS. System board. System board. System board. System board. Run BIOS Setup Utility and save it. If the same error happens after doing it, replace the system board. 1. Backup battery. 2. System board. Run BIOS Setup Utility and save it. If the same error happens after doing it, check these FRUs: 1. Backup battery. 2. System board. Run BIOS Setup Utility and save it. If the same error happens after doing it, check these FRUs: 1. Backup battery. 2. System board. Run interactive tests of the keyboard and the auxiliary input device. Confirm that the keyboard cable is connected correctly. If setting is incorrect, reset the BIOS Setup Utility. If setting is correct, after confirming the PS2 keyboard is correct, replace the system board. If setting is incorrect, reset the BIOS Setup Utility. If setting is correct, after confirming the PS2 mouse is correct, replace the system board. System board. 1. System board. 2. Keyboard. System board. If the error continues, check these FRUs: 1. Backup battery. 2. System board. If the error continues, check these FRUs: 1. Backup battery. 2. System board. 42 ThinkPad SL400, SL400c, SL500, and SL500c Hardware Maintenance Manual