Lenovo ThinkPad i Series 1300 ThinkPad i Series 1200/1300, TP 130 - User's Ref - Page 67
Replace the memory slot cover over the memory slot, aligning
View all Lenovo ThinkPad i Series 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Increasing memory 4. Install the DIMM into the memory slot. Note: To avoid damaging the DIMM, do not touch its contact edge. a. Find the notch on the side of the DIMM. b. With the notched end of the DIMM toward the right side of the socket, insert the DIMM, at an angle or approximately 20°, into the socket; then press it firmly (1). c. Pivot the DIMM until it snaps into place (2). 1 2 5. Replace the memory slot cover over the memory slot, aligning the back side of the cover first as shown; then tighten the screws. 6. Replace the battery pack. 7. Turn the computer over again, power on the computer. 8. Confirm that the new memory size is detected: Extending the features of your computer 53
Increasing memory
4. Install the DIMM into the memory slot.
Note:
To avoid damaging the DIMM, do not touch its contact
edge.
a. Find the notch on the side of the DIMM.
b. With the notched end of the DIMM toward the right side of
the socket, insert the DIMM, at an angle or approximately
20°, into the socket; then press it firmly (1).
c. Pivot the DIMM until it snaps into place (2).
1
2
5. Replace the memory slot cover over the memory slot, aligning
the back side of the cover first as shown; then tighten the
screws.
6. Replace the battery pack.
7. Turn the computer over again, power on the computer.
8. Confirm that the new memory size is detected:
Extending the features of your computer
53