Lenovo ThinkPad i Series 1300 ThinkPad i Series 1200/1300, TP 130 - User's Ref - Page 69
Remove the DIMM.
View all Lenovo ThinkPad i Series 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Increasing memory 1. Power off the computer an disconnect the AC Adapter and all cables from the computer. 2. Close the LCD, turn the computer over, and then remove the battery pack. 3. Loosen the screw and remove the memory slot cover. 4. Press out on the latches on both edges of the socket at the same time. 5. Remove the DIMM. Be sure to save the DIMM for future use. 6. Replace the memory slot cover; then tighten the screws. 7. Replace the battery pack. 8. Turn the computer over again; then connect the AC Adapter and all the cables you disconnected. Note: Base memory (32 MB or 64 MB) is internal and cannot be upgraded. Extending the features of your computer 55
Increasing memory
1. Power off the computer an disconnect the AC Adapter and all
cables from the computer.
2. Close the LCD, turn the computer over, and then remove the
battery pack.
3. Loosen the screw and remove the memory slot cover.
4. Press out on the latches on both edges of the socket at the
same time.
5. Remove the DIMM.
Be sure to save the DIMM for future use.
6. Replace the memory slot cover; then tighten the screws.
7. Replace the battery pack.
8. Turn the computer over again; then connect the AC Adapter and
all the cables you disconnected.
Note:
Base memory (32 MB or 64 MB) is internal and cannot be
upgraded.
Extending the features of your computer
55