Lenovo ThinkStation E30 (English) User Guide - Page 22
Locating internal drives, Machine type and model label, replace internal drives for your computer.
View all Lenovo ThinkStation E30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Locating internal drives Internal drives are devices that your computer uses to read and store data. You can add drives to your computer to increase storage capacity and enable your computer to read other types of media. Internal drives are installed in bays. In this manual, the bays are referred to as bay 1, bay 2, and so on. When installing or replacing an internal drive, it is important to note the type and size of the drive that you can install or replace in each bay and correctly connect the cables to the drive installed. Refer to the appropriate section in "Installing or replacing hardware" on page 25 for instructions on how to install or replace internal drives for your computer. Figure 5 "Drive bay locations" on page 12 shows the locations of the drive bays. Figure 5. Drive bay locations 1 Bay 1 - Optical drive bay (with an optical drive installed on some models) 2 Bay 2 - Optical drive bay 3 Bay 3 - Card reader drive bay 4 Bay 4 - Secondary SATA hard disk drive bay 5 Bay 5 - Primary SATA hard disk drive bay (with a hard disk drive installed) Machine type and model label The machine type and model label identifies your computer. When you contact Lenovo for help, the machine type and model information helps support technicians to identify your computer and provide faster service. 12 ThinkStation User Guide