Lenovo ThinkStation E31 Hardware Maintenance Manual (HMM) (June 2012) - ThinkS - Page 102

Disconnect the card reader cable from the front USB connector on the system board. See Locating

Get Lenovo ThinkStation E31 PDF manuals and user guides View all Lenovo ThinkStation E31 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 102 highlights

To replace the card reader, do the following: 1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. See "Removing the computer cover" on page 86. 3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 87. 4. Locate the card reader. See "Locating major FRUs and CRUs" on page 71. 5. Disconnect the card reader cable from the front USB connector on the system board. See "Locating parts on the system board" on page 74. 6. Press the blue retaining clip to remove the card reader out of the chassis. Figure 24. Removing the card reader 7. Install the card reader retainer on the side of the new card reader. Figure 25. Installing the card reader retainer 96 ThinkStation Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
To replace the card reader, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See “Removing the computer cover” on page 86.
3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 87.
4. Locate the card reader. See “Locating major FRUs and CRUs” on page 71.
5. Disconnect the card reader cable from the front USB connector on the system board. See “Locating
parts on the system board” on page 74.
6. Press the blue retaining clip to remove the card reader out of the chassis.
Figure 24. Removing the card reader
7. Install the card reader retainer on the side of the new card reader.
Figure 25. Installing the card reader retainer
96
ThinkStation Hardware Maintenance Manual