LevelOne FCS-0020 User Manual - Page 28
FCS-0020/WCS-0020 Setup
View all LevelOne FCS-0020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
FCS-0020/WCS-0020 Setup The FCS-0020/WCS-0020 configuration does NOT have been changed, unless: • You wish to change the port number from the default value (1024). • You wish to use the DDNS (Dynamic DNS) feature of the FCS-0020/WCS-0020. HTTP Port Configuration Normally, HTTP (Web) connections use port 80. Since the FCS-0020/WCS-0020 uses HTTP, but port 80 is likely to be used by a Web Server, you can use a different port for the FCS-0020/WCS-0020. This port is called the Secondary Port. The default Secondary Port is 1024. If you prefer to use a different port number, you can specify the port number on the FCS-0020/WCS-0020's Network screen, as shown below. Figure 10: Network Screen See Chapter 5 - Web-based Management for further details on using the Network screen. Viewers need to know this port number in order to connect and view live Video, so you must inform viewers of the correct port number. DDNS (Dynamic DNS) Many internet connections use a "Dynamic IP address", where the Internet IP address is allocated whenever the Internet connection is established. This means that other Internet users don't know the IP address, so can't establish a connection. 22