LevelOne FCS-0020 User Manual - Page 39

Secondary Port This sets the port number for HTTP (Web) connections to the Camera, whether for administration or viewing video. If enabled, you can connect using either port 80 or the Secondary port. You must enter the Secondary port number (between 1024 to 65535) in the field provided. Note that when using a port number which is not 80, you must specify the port number in the URL. For example, if the Camera's IP address was 192.168.1.100 and the Secondary port was 1024, you would specify the URL for the Camera as follows: http://192.168.1.100:1024 RTP/RTSP The RTSP (Real Time Streaming Protocol), a standard for connected client(s) to control streaming data (MPEG-4) over the World Wide Web. Enter the RTSP Port number (between 1024 and 65535) in the field provided. The default RTSP Port is 554. The RTP (Real Time Transport Protocol), an Internet protocol for transmitting real-time data such as audio and video. Max RTP Data Packet field will let users limit the size of the file. Enter the desired value between 400 and 1400. Multicast RTP/RTSP Enable Multicast Enable the feature as required. Video Address Enter the address of video. Video Port Enter the desired value (between 1024 to 65534) in the field provided. The number you entered must be even values. Audio Address Enter the address of the audio. Audio Port Enter the desired value (between 1024 to 65534) in the field provided. The number you entered must be even values. Time to Live Enter the desired length of time, if the packets fail to be delivered to their destination within. The Time to Live you entered must be in-between 1 to 255. 33