LevelOne GES-2451 Manual - Page 110
History Control
View all LevelOne GES-2451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
RMON Group History Group Event Group Statistic Group Alarm Group Function After a history group is configured, the switch collects and records network statistics information periodically, based on which the management station can monitor network effectively. Event Group is used to define RMON events. Alarms occur when an event is detected. Statistic Group is set to monitor the statistic of alarm variables on the specific ports. Alarm Group is configured to monitor the specific alarm variables. When the value of a monitored variable exceeds the threshold, an alarm event is generated, which triggers the switch to act in the set way. The RMON Groups can be configured on the History Control, Event Config and Alarm Config pages. 10.3.1 History Control On this page, you can configure the History Group for RMON. Choose the menu SNMP→RMON→History Control to load the following page. Figure 10-9 History Control The following entries are displayed on this screen: History Control Table Select: Select the desired entry for configuration. Index: Displays the index number of the entry. Port: Specify the port from which the history samples were taken. Interval: Specify the interval to take samplings from the port. Owner: Enter the name of the device or user that defined the entry. Status: Select Enable/Disable the corresponding sampling entry. 104