LevelOne GES-2451 Manual - Page 95
DSCP Priority Config, Priority Level, Schedule Mode, Operation, Description, DSCP Priority
View all LevelOne GES-2451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Figure 9-9 DSCP Priority The following entries are displayed on this screen: DSCP Priority Config DSCP Priority: Select Enable or Disable DSCP Priority. Priority Level DSCP: Indicates the priority determined by the DS region of IP datagram. It ranges from 0 to 63. Priority: Indicates the 802.1P priority the packets with tag are mapped to. The priorities are labeled as CoS0 ~ CoS7. Note: To complete QoS function configuration, you have to go to the Schedule Mode page to select a schedule mode after the configuration is finished on this page. Configuration Procedure: Step Operation Description 1 Log on to the DSCP Priority page 2 Enable DSCP priority function Required. By default, the DSCP priority function is disabled. 3 Map the DSCP priority to the Required. Select DSCP priority and the corresponding priority level priority level. 4 Select a schedule mode Required. Log on to the Schedule Mode page to select a schedule mode. 89