LevelOne GES-2451 Manual - Page 94
DSCP Priority
View all LevelOne GES-2451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
enabled, the packets with 802.1Q tag are mapped to different priority levels based on 802.1P priority mode. The untagged packets are mapped based on port priority mode. Choose the menu QoS→DiffServ→802.1P Priority to load the following page. Figure 9-8 802.1P Priority The following entries are displayed on this screen: Priority Level Priority Tag: Indicates the precedence level defined by IEEE802.1P. Priority Level: Indicates the priority level the packets with tag are mapped to. The priority levels are labeled as TC 0, TC1, TC2 and TC3. Configuration Procedure: Step Operation Description 1 Configure the mapping Required. On QoS→DiffServ→802.1P Priority page, relation between the 802.1P configure the mapping relation between the 802.1P priority and TC priority and TC. 2 Select a schedule mode Required. On QoS→DiffServ→Schedule Mode page, select a schedule mode. 9.1.4 DSCP Priority On this page you can configure DSCP priority. DSCP (DiffServ Code Point) is a new definition to IP ToS field given by IEEE. This field is used to divide IP datagram into 64 priorities. When DSCP Priority is enabled, IP datagram are mapped to different priority levels based on DSCP priority mode; non-IP datagram with 802.1Q tag are mapped to different priority levels based on 802.1P priority mode if 802.1P Priority mode is enabled; the untagged non-IP datagram are mapped based on port priority mode. Choose the menu QoS→DiffServ→DSCP Priority to load the following page. 88