LevelOne GES-2451 Manual - Page 84
Static Multicast IP
View all LevelOne GES-2451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
VLAN ID: Port: Type: Multicast IP Table Multicast IP VLAN ID: Forward Port Type: Enter the VLAN ID the desired entry must carry. Select the port number the desired entry must carry. Select the type the desired entry must carry. All: Displays all multicast IP entries. Static: Displays all static multicast IP entries. Dynamic: Displays all dynamic multicast IP entries. Displays multicast IP address. Displays the VLAN ID of the multicast group. Displays the forward port of the multicast group. Displays the type of the multicast IP. Note: If the configuration on VLAN Config page and multicast VLAN page is changed, the switch will clear up the dynamic multicast addresses in multicast address table and learn new addresses. 8.2.2 Static Multicast IP Static Multicast IP table, isolated from dynamic multicast group and multicast filter, is not learned by IGMP Snooping. It can enhance the quality and security for information transmission in some fixed multicast groups. Choose the menu Multicast→Multicast IP→Static Multicast IP to load the following page. Figure 8-9 Static Multicast IP Table The following entries are displayed on this screen: Create Static Multicast Multicast IP: Enter static multicast IP address. VLAN ID: Enter the VLAN ID of the multicast IP. 78