LevelOne GES-2451 Manual - Page 87
Packet Statistics
View all LevelOne GES-2451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Port Select: Select: Port: Filter: Action Mode: Bound IP-Range (ID): Max Groups: LAG: Click the Select button to quick-select the corresponding port based on the port number you entered. Select the desired port for multicast filtering. It is multi-optional. Displays the port number. Select Enable/Disable multicast filtering feature on the port. Select the action mode to process multicast packets when the multicast IP is in the filtering IP-range. Permit: Only the multicast packets whose multicast IP is in the IP-range will be processed. Deny: Only the multicast packets whose multicast IP is not in the IP-range will be processed. Enter the IP-rang ID the port will be bound to. Specify the maximum number of multicast groups to prevent some ports taking up too much bandwidth. Displays the LAG number which the port belongs to. Note: 1. Multicast Filter feature can only have effect on the VLAN with IGMP Snooping enabled. 2. Multicast Filter feature has no effect on static multicast IP. 3. Up to 5 IP-Ranges can be bound to one port. Configuration Procedure: Step Operation Description 1 Configure IP-Range Required. Configure IP-Range to be filtered on Multicast→Multicast Filter→IP-Range page. 2 Configure multicast filter Optional. Configure multicast filter rules for ports on rules for ports Multicast→Multicast Filter→Port Filter page. 8.4 Packet Statistics On this page you can view the multicast data traffic on each port of the switch, which facilitates you to monitor the IGMP messages in the network. Choose the menu Multicast→Packet Statistics to load the following page. 81