LevelOne KVM-0420 Manual - Page 10
Scan Type, Auto Scan.
View all LevelOne KVM-0420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
LevelOne next computer in sequence. The length of the Auto Scan interval (Scan Rate) is adjustable. To abort the Auto Scan mode, press the left Ctrl key twice. Note: Scan Type determines whether an eye-marked computer is to be displayed during Auto Scan. % Manual Scan enables you to manually switch back and forth between power-on computers. Left Ctrl + left Ctrl + F2 Press ↑ or ↓ to select the previous or the next computer in sequence. And, press any other key to abort the Manual Scan. Note: Scan Type determines whether an eye-marked computer is to be displayed during Auto Scan. % To adjust Scan Rate which sets the duration before switching to the next computer in Auto Scan: Left Ctrl + left Ctrl + F3 The KVM switch beeps one to four times indicating the scan interval of 3, 8, 15 and 30 seconds respectively.. % To adjust keyboard typematic rate (characters/sec), this setting over-rides that of BIOS and any operating system: Left Ctrl + left Ctrl + F4 The KVM switch beeps 1 to 4 times corresponding to 10, 15, 20 and 30 characters/sec respectively. % Audio Stick An optional multimedia module can be LINKed to the back of each KVM switch for selecting microphone and stereo speaker signals. There are two options for Audio Stick: ON and Off. When set to 'On', audio selection follows computer selection. When set to 'Off', audio selection stops following computer selection. It is useful if you want to listen to a particular computer's audio signal while operating other computers. Left Ctrl + left Ctrl + F5 The KVM switch beeps once or twice corresponding to On and Off respectively. 17 LevelOne 18